15 ELECTRICAL SYSTEM 124
L02157-11
–
Pull back the positive terminal cover
.
–
Disconnect positive cable
from the battery.
–
Detach rubber band
.
– Pull the battery up and out of the battery holder.
Info
Never operate the motorcycle with a discharged battery or without a battery. In
both cases, electrical components and safety devices can be damaged. The vehi-
cle is therefore no longer roadworthy.
15.2 Installing the battery
L02157-10
Main work
– Position the battery in the battery holder.
Guideline
The terminals of the battery must face upwards.
Battery (ETZ-9-BS) ( p. 177)
–
Reconnect rubber band
.
–
Position the positive cable
and mount and tighten the screw.
–
Position positive terminal cover
.
To Next Page
Loading...
