5-21
Starter drive
Idler gear 1
Check the toothing and bearing position of the starter idler gear for damage and wear. Also check the idler gear bearing bolt for
running marks.
Idler gear
2 with torque limiter
Check the toothing and bearing position of the idler gear for wear. Also check the idler gear bearing bolt for running marks.
Mount the idler gear with the needle cage on the bearing bolt and check the clearance.
Freewheel gear
3
Check the toothing and bearing position for wear.
Freewheel
4
Disassemble the freewheel (see next page) and check for damage and wear.
Starter engine
5
Check the toothing for wear; replace the O-ring 6 on the flange.
1
2
3
4
6
5
To Next Page
Loading...
