7 COMBINATION INSTRUMENT
100
7.16.29 ABS Mode
F02777-01
Condition
• The motorcycle is stationary.
• ABS is switched on.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until the Motorcycle menu is
marked on the display. Press the SET button to open the menu.
– Press the UP or DOWN button until ABS Mode is marked on the
display.
– Keep the SET button pressed for 3-5 seconds to change the
ABS mode.
Info
Do not open the throttle during the selection.
If the ABS mode Road is enabled, ABS controls both
wheels.
If the ABS mode Supermoto is enabled, ABS only con-
trols the front wheel. The rear wheel is not controlled
by ABS and may lock during braking maneuvers. MSR
(optional) has been deactivated.
After the ignition is switched back on, the ABS mode is
reset to Road.
To Next Page
Loading...
