EasyManua.ls Logo

KTM 890 Duke R US 2020 - Launch-Control (Optional); Starting off with Launch Control (Optional)

KTM 890 Duke R US 2020
317 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 RIDING INSTRUCTIONS
126
10.4 LaunchControl (optional)
H02000-01
Launch Control is a vehicle electronics function.
Launch control adjusts the engine speed in order to achieve the
best possible acceleration.
Launch control can be used for starting off for a maximum of three
times in succession. Launch control is temporarily deactivated
after the third starting off in order to protect the engine, transmis-
sion and cooling system from overloading.
Launch control is also deactivated if all conditions for activation
are no longer met.
Launch control is enabled again in the following cases: the engine
runs for at least three minutes, the engine is switched off for 20
minutes or a distance of 1.5 km (0.93 mi) has been covered.
10.5 Starting off with launch control (optional)
Warning
Danger of accidentsLaunch control enables very powerful acceleration which may ask too much of a
novice rider.
Only use the launch control if you have the appropriate experience.
Do not use launch control on public roads.

Table of Contents

Related product manuals