EasyManua.ls Logo

KTM 890 Duke R US 2020 - Engine Traction Torque Control (MSR)

KTM 890 Duke R US 2020
317 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RIDING INSTRUCTIONS 10
135
H02700-10
If the quickshifter + (optional) is enabled in the combination
instrument, you can shift down in the speed range shown with-
out pulling the clutch lever.
Info
The maximum engine speed before shifting down in
revolutions per minute is shown in the figure.
Depress the shift lever quickly back to the stop without
changing the throttle twist grip position.
10.8 Engine traction torque control (MSR)
402423-01
The MSR is a function of the engine control.
If the engine braking effect is too great, the MSR prevents the rear
wheel from locking or sliding away on a sloping position.
To avoid slip of the rear wheel, the MSR only opens the throttle
valve as far as absolutely necessary.
The MSR is applied on surfaces, where the friction is to low to
open the slipper clutch.
To further increase ride safety, the MSR is slope dependent.
Info
When the ABS or active ABS mode Supermoto is switched
off, the MSR is not active.

Table of Contents

Related product manuals