SERVICE SCHEDULE 11
147
11.3 Recommended work
every 48 months
every 12 months
every 30,000 km (18,600 mi)
every 15,000 km (9,300 mi)
after 1,000 km (620 mi)
Check the frame. ●
Check the link fork. ●
Check/clean the oil nozzle for clutch lubrication. ○ ● ●
Check the fork bearing for play. ● ●
Check the wheel bearing for play. ● ●
Change the coolant. ( p. 248) ●
Empty the drainage hoses. ○ ● ● ● ●
Check all hoses (e.g. fuel, cooling, bleeder, drainage hoses, etc.) and sleeves for crack-
ing, tightness, and correct routing.
● ● ● ●
Grease all moving parts (e.g. side stand, hand lever, chain, etc.) and check for smooth
operation.
○ ● ● ● ●
Check the tightness of the safety-relevant screws and nuts which are easily accessi-
ble.
○ ● ● ● ●
○ One-time interval
● Periodic interval
To Next Page
Loading...
