KTM 890 Duke R US 2020 - Checking the Chain, Rear Sprocket, Engine Sprocket, and Chain Guide

SERVICE WORK ON THE CHASSIS 13
175
Guideline
Nut, rear wheel
spindle
M25x1.5 90 Nm (66.4 lbf ft)
Thread and contact area
of wheel spindle greased
Finishing work
– Check the chain tension. ( p. 171)
– Remove the rear of the motorcycle from the lifting gear.
( p. 158)
13.14 Checking the chain, rear sprocket, engine sprocket, and chain guide
Preparatory work
– Raise the motorcycle with the rear lifting gear. ( p. 158)
100132-10
Main work
– Check the rear sprocket and engine sprocket for wear.
» If the rear sprocket and engine sprocket are worn:
– Change the drivetrain kit.
Info
The engine sprocket, rear sprocket, and chain
should always be replaced together.