3 WORK
10
3.8 Mounting the front rider's seat
H01084-10
–
Attach recesses
1
on the front rider's seat to the fuel tank,
push the front rider's seat forward, and lower at the rear.
The pin
2
locks audibly in place.
–
Check that the front rider's seat is mounted correctly.
3.9 Removing the battery cover
Preparatory work
– Remove the front rider's seat. ( p. 9)
V00642-10
Main work
–
Pull loop
1
toward the rear.
–
Pull battery cover
2
forward and take off toward the top.
3.10 Mounting the battery cover
V00643-10
Main work
–
Position battery cover
1
and pull toward the rear.
The battery cover engages with an audible click.
– Check the battery cover is seated correctly.
Finishing work
–
Mount the front rider's seat. ( p. 10)
To Next Page
Loading...
