KTM RC 125 - 2.6 Protective Clothing; 2.7 Work Rules; 2.8 Environment

3 WORK
12
Alternative 3
CH battery charger XCharge‑professional
(00029095053)
Info
Follow the instructions of the charger and the manual.
– Disconnect the battery charger after charging the 12-V battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Recharge the 12-V battery
regularly when the motorcy-
cle is not being used
3 months
Finishing work
– Connect the negative cable of the 12-V battery. ( p. 12)
– Mount the battery cover. ( p. 10)
– Mount the front rider's seat. ( p. 10)
– Set the clock. ( p. 13)
3.12 Disconnecting the negative cable of the 12-V battery
Preparatory work
– Switch off the ignition by turning the ignition key to the posi-
tion .
– Remove the front rider's seat. ( p. 9)
– Remove the battery cover. ( p. 10)
V00663-10
Main work
–
Disconnect negative cable
1
of the 12-V battery.
3.13 Connecting the negative cable of the 12-V battery
V00663-10
Main work
–
Connect negative cable
1
of the 12-V battery.
Finishing work
– Mount the battery cover. ( p. 10)
– Mount the front rider's seat. ( p. 10)