KTM RC 125 - Page 21

TECHNICAL DATA 4
19
Screw, shift lever M8 17 Nm (12.5 lbf ft)
Loctite
®
243™
Screw, top triple clamp M8 15 Nm (11.1 lbf ft)
Screw, front brake caliper M8x1 30 Nm (22.1 lbf ft)
Loctite
®
204™
Nut, rear sprocket screw M8x1.25 27 Nm (19.9 lbf ft)
Loctite
®
243™
Fitting side stand M10 35 Nm (25.8 lbf ft)
Loctite
®
243™
Remaining nuts, chassis M10 50 Nm (36.9 lbf ft)
Remaining screws, chassis M10 45 Nm (33.2 lbf ft)
Screw, side stand pivot M10 35 Nm (25.8 lbf ft)
Nut, side stand bracket M10x1.25 35 Nm (25.8 lbf ft)
Screw, front footrest bracket /
engine bearer
M10x1.25 49 Nm (36.1 lbf ft)
Nut, fork pivot M14x1.5 100 Nm (73.8 lbf ft)
Nut, rear wheel spindle M14x1.5 90 Nm (66.4 lbf ft)
Screw, top steering head M16x1.5 52 Nm (38.4 lbf ft)
Loctite
®
204™
Lambda sensor M18x1.5 19 Nm (14 lbf ft)
Adjusting ring, link fork bearing M22x1 Tighten and ensure that there is no
play
Nut, steering head M30x1 1.
55 Nm (40.6 lbf ft)
2. Loosen (counterclockwise)
2 turns
3.
5 Nm (3.7 lbf ft)