11 SERVICE WORK ON THE CHASSIS 35
11.1 Raising the rear of the motorcycle with lifting gear
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
L00480-01
– Stand the motorcycle upright, align the lifting gear to the link fork and the
adapters, and raise the motorcycle.
Lifting gear, rear (B3329055000)
11.2 Removing the rear of motorcycle from the lifting gear
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
– Secure the motorcycle against falling over.
– Remove the rear lifting gear.
11.3 Raising the front of the motorcycle with lifting gear
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
Preparatory work
– Raise the rear of the motorcycle with lifting gear. ( p. 35)
L00479-01
Main work
– Move the handlebar to the straight-ahead position. Align the lifting gear at the front
with the adapters to the fork legs.
Front wheel stand (61029055300)
Info
Always raise the rear of the motorcycle first.
– Raise the motorcycle at the front.
11.4 Taking the motorcycle off of the front lifting gear
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
– Secure the motorcycle against falling over.
– Remove the lifting gear from the front.
To Next Page
Loading...
