19 EMS COMPONENTS 73
19.1 Engine control unit
L00578-01
The engine control unit can be accessed using the included connection cable and the
software on the CD-ROM. Various parameters can be adjusted using the software.
Info
KTM would like to emphasize that incorrect parameter settings can cause dam-
age to the vehicle and engine.
Explicit instructions on how to install and use the software are also contained on the
CD-ROM.
For optimal engine running, KTM recommends setting the correction of the injection
rate to a valve that keeps the fuel-air mixture (λ) at 0.88 over the entire characteristic
map.
19.2 Adjusting the throttle position sensor
Info
The position of the throttle position sensor is preset at the factory. This screw may only be opened to replace a faulty sensor.
The setting of the 0% and 100% position is made in the MAYA software.
Preparatory work
– Check the play in the throttle cable. ( p. 63)
Main work
– Ensure that the throttle valve is fully closed.
–
Connect the engine control unit with the computer (see the MAYA Instructions on the CD-ROM in the separate enclosure).
L00565-01
– In the MAYA software, select open EOL setting window.
L00566-11
– Select Start Calibration Read. The current sensor value is displayed in [bit] in the REAL_TIME_TPS field.
– Check the sensor value by opening and closing the throttle grip multiple times.
Guideline
REAL_TIME_TPS 58… 62
To Next Page
Loading...
