16 ELECTRICAL SYSTEM
178
– Set the clock. ( p. 75)
16.4 Changing the ABS fuses
Warning
Fire hazard Incorrect fuses overload the electrical system.
– Only use fuses with the required ampere value.
– Do not bypass or repair fuses.
Info
Two fuses for the ABS are located under the protective cap next to the negative terminal of the battery.
These fuses protect the return pump and the hydraulic unit of the ABS. The third fuse, which protects the
ABS control unit, is located in the fuse box.
Preparatory work
– Switch off the ignition by turning the ignition key to the posi-
tion .
– Remove the front rider's seat. ( p. 118)
– Remove the battery cover. ( p. 130)
To Next Page
Loading...
