SERVICE WORK ON THE ENGINE 19
219
H01080-10
–
Remove filler plug
8
from the clutch cover together with the
O-ring, and fill up with engine oil.
Engine oil 1.7 l (1.8 qt.) Engine oil
(SAE 15W/50)
( p. 252)
– Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
– Start the engine and check that it is oil-tight.
Finishing work
– Fit the front spoiler. ( p. 134)
– Check the engine oil level. ( p. 215)
To Next Page
Loading...
