KTM RC 390 2020 - Chassis Service Work Procedures; Raising Motorcycle with Rear Lifting Gear; Removing Rear from Lifting Gear

11 SERVICE SCHEDULE
108
every 48 months
every 12 months
every 30,000 km (18,600 mi)
every 7,500 km (4,650 mi)
after 1,000 km (620 mi)
Check the link fork. ●
Check the fork bearing for play. ● ●
Check the wheel bearing for play. ● ●
Grease all moving parts (e.g. side stand, hand lever, chain, ...) and check for smooth
operation.
○ ● ● ● ●
Empty the drainage hoses. ○ ● ● ● ●
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking,
leaks, and correct routing.
○ ● ● ● ●
Check the antifreeze. ○ ● ● ●
Change the coolant. ( p. 206) ●
Check the tightness of the safety-relevant screws and nuts which are easily accessi-
ble.
○ ● ● ● ●
○ One-time interval
● Periodic interval