COOLING SYSTEM 17
201
V00178-11
Main work
–
Remove cap
1
of the compensating tank.
– Add coolant up to the MAX marking.
Coolant ( p. 246)
– Mount the cap of the compensating tank.
17.5 Draining the coolant
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
– Do not open the radiator, the radiator hoses or other cooling system components if the engine or the
cooling system are at operating temperature.
– Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses
or other components of the cooling system.
– In the event of scalding, rinse the area affected immediately with lukewarm water.
To Next Page
Loading...
