Kubler CODIX 565 - Page 36

9.4.1 Multifunction Key
Menu Function MP-Key
Select function:
Reset tare (TARA) value with
M
P-Key – only when current
m
easured value appears in the
display
OFF
ON
Select function:
Reset MIN value with MP-Key
– only when MIN value
appears in the display
OFF
ON
Select function:
Reset MAX with MP-Key –
only when MAX value appears
in the display
OFF
ON
Select function Output-Latch
Reset with MP-Key
- only if output is in memory
mode (ALARMx = LATCH)
OFF
ON
- this setting is possible only if
all other settings are set to
OFF
Select function
Reset Totaliser with MP-Key
- only if totaliser is in the
display
OFF
ON
9.4.2 Multifunction Inputs
Menu Function MP-Inputs
Select function MP-Input 1
No function
Reset MIN value
R
eset MAX value
Reset MIN and MAX values
Reset Output-Latch
- only if output is in memory
mode (ALARMx = LATCH)
Hold (‘freeze’) display
Lock-out limit value setting
Lock-out programming and
default setting
Lock-out limit value setting,
programming, default setting
and MP-Key
Tare
Reset tare value
Reset totaliser
Select function MP-Input 2
No function
Reset MIN value
Reset MAX value
Reset MIN and MAX values
Reset Output-Latch
- only if output is in memory
mode (ALARMx = LATCH)
Hold (‘freeze’) display
Lock-out limit value setting
Lock-out programming and
default setting
Lock-out limit value setting,
programming, default setting
and MP-Key
Tare
Reset tare value
Reset totaliser
Page 14