Kubota 77700-VC5011 - User Manual

To Next Page

INSTALLATION MANUAL

PLASTIC CANOPY

(77700-VC5011, VC5011) (color: black)

KUBOTA RTV-X900, RTV-X1120D, RTV-XG850

Estimated assembly time: 30 minutes

PRINTED IN THE USA © KUBOTA TRACTOR CORPORATION 2019 Code: 77700-05183 (Rev. D)

IMPORTANT!

CAB COMPONENT ORDER OF INSTALLATION:

1. Canopy Mounts (Canopy Kit)

2. Windshield Assembly

3. Door Strikers & Hinge Mounts (Door Kit)

4. Rear Panel Assembly

5. Canopy Assembly

6. Door Assemblies

NOTE: Front Heavy Duty Springs (V5218) or Heavy Duty Spring Damper Assembly (V5219) is

required if complete cab is installed (RTV-X900, RTV-X1120D, RTV-XG850).

BEFORE INSTALLING CANOPY

 Read all instructions and safety instructions in this manual.

 Refer to your machine’s operator’s manual and safety instructions on your

machine’s safety decals.

 Wear appropriate personal protective equipment (PPE) when performing work.

 Hang a "DO NOT OPERATE" tag in operator station.

 If installing windshield and/or rear panel, install those components before installing

canopy.

 If installing work lights, it will ease assembly if they are installed prior to installing

canopy onto vehicle.

WARNING

To avoid personal injury or death:

 Cabs, blades, and general accessories add additional weight to the base vehicle. Deduct the accessory’s total weight

from the vehicle’s rated capacity including passenger and driver. Never operate the vehicle outside of its rated weight

capacity.

 Exposure to carbon Monoxide can cause illness, serious injury, or death. Never operate vehicle if suspicious of

Carbon Monoxide. Inspect exhaust system for leaks monthly. Leaks can result from loose connections, corrosion,

cracks, or other damage to the exhaust manifold. If leaks are found, repair or replace exhaust system. Do not use

vehicle until repair or replacement is complete.

 This canopy does not provide protection from: a rollover (or other accidents), from flying objects (including golf balls),

or from lightning. When lightning threatens, take cover and do not operate vehicle.

Need help?

Do you have a question about the Kubota 77700-VC5011 and is the answer not in the manual?

This document is an installation manual for a Kubota Plastic Canopy, specifically model numbers 77700-VC5011 and VC5011, in black color, designed for Kubota RTV-X900, RTV-X1120D, and RTV-XG850 utility vehicles.

Function Description:

The Kubota Plastic Canopy is an accessory designed to provide overhead coverage for the specified Kubota RTV models. While it offers protection from environmental elements, the manual explicitly states that "This canopy does not provide protection from: a rollover (or other accidents), from flying objects (including golf balls), or from lightning." It serves as a component of a larger cab system, and its installation is part of a specific order for cab components. The canopy is intended to enhance the utility vehicle by offering a degree of shelter for the operator and passengers.

Important Technical Specifications:

Part Numbers: 77700-VC5011, VC5011 (Canopy Kit); 77700-05136 (Canopy, Plastic, Black); 77700-06749 (Roof Mount, Stamped and Drawn (left)); 77700-06932 (Roof Mount, Stamped and Drawn (right)); 77700-05137 (Hardware Kit, Plastic Roof); 77700-05134 (1/2" w x 9/16" Rubber Foam Weatherseal (92" long)).
Color: Black.
Compatibility: Kubota RTV-X900, RTV-X1120D, RTV-XG850.
Hardware Kit Contents (77700-05137):
- 6X SCREW, HEX FLANGE, 5/16-18 X 1" LG
- 10X STEEL FENDER WASHER, 5/16" ID X 1.25" OD
- 6X RUBBER FENDER WASHER, 5/16" ID X 1.25" OD
- 6X NUT, HEX FLANGE, NYLOC, 5/16-18
- 2X SCREW, HEX FLANGE, M10 x 1.25 X 30mm LG
Torque Specifications:
- Canopy mount bolts (M10): 38 ft.-lbs.
- M10 x 30mm long screws (rear ROPS): 38 ft.-lbs.
Required Additional Components for Full Cab: Front Heavy Duty Springs (V5218) or Heavy Duty Spring Damper Assembly (V5219) are required if a complete cab is installed on RTV-X900, RTV-X1120D, RTV-XG850 models.
Material: Plastic canopy, stamped and drawn roof mounts, rubber foam weatherseal.
Safety Warning (California Proposition 65): Cancer and reproductive harm - www.P65Warnings.ca.gov.

Usage Features:

Installation Order: The canopy is part of a larger cab component installation sequence. The recommended order is: 1. Canopy Mounts (Canopy Kit), 2. Windshield Assembly, 3. Door Strikers & Hinge Mounts (Door Kit), 4. Rear Panel Assembly, 5. Canopy Assembly, 6. Door Assemblies. This specific order is crucial for proper assembly, especially if a windshield and/or rear panel are being installed.
Pre-installation Steps: Before installing the canopy, users are instructed to read all instructions and safety information, refer to the machine's operator's manual and safety decals, wear appropriate personal protective equipment (PPE), and hang a "DO NOT OPERATE" tag in the operator station.
Integration with Other Accessories: If installing a windshield and/or rear panel, these components should be installed before completing the canopy installation. Similarly, if installing work lights, it is recommended to install them prior to installing the canopy onto the vehicle for ease of assembly.
Safety Precautions During Operation: The manual includes a "WARNING" section emphasizing critical safety points:
- Cabs, blades, and general accessories add weight, which must be deducted from the vehicle's rated capacity. The vehicle should never be operated outside its rated weight capacity.
- Carbon Monoxide exposure can cause serious injury or death. Users are advised not to operate the vehicle if Carbon Monoxide is suspected and to inspect the exhaust system monthly for leaks. Any leaks must be repaired before operating the vehicle.
- The canopy does not provide protection from rollovers, other accidents, flying objects (including golf balls), or lightning. Users are advised to take cover and not operate the vehicle during lightning threats.
Assembly Procedure: The manual provides detailed, step-by-step instructions for installing the canopy, including removing existing ROPS bolts, installing canopy mounts, applying foam tape, and securing the canopy with various screws, washers, and nuts. Diagrams illustrate fastener installation order and component placement.
Estimated Assembly Time: 30 minutes.

Maintenance Features:

Hardware Inspection: Check and tighten hardware after the first 20 hours of operation. Periodically inspect and tighten hardware for the remainder of the unit's service life.
Cleaning Instructions ("IMPORTANT CLEANING INFORMATION"):
- Keep enclosure components clean to prevent dust and dirt buildup.
- NEVER USE: Abrasive detergent/vehicle cleaner or a wire bristled brush.
- NEVER USE: Citrus-based cleaners (e.g., orange or lemon), as these will permanently damage the plastic.
- Recommended Cleaning Method: Clean plastic surfaces thoroughly with warm soapy water and a COTTON cloth or chamois. Use mild soap (dish liquid or equivalent). Clean in a light circular motion for best results.
- Interior Cleaning: Use extra caution when cleaning the interior, as it is more sensitive than the exterior (which has an extra U.V. stability coating).
- Grease and Oil Removal: Use mineral spirits and a COTTON cloth or chamois to remove grease and oil.

Kubota 77700-VC5011 Specifications

General

Brand	Kubota
Model	77700-VC5011
Category	Tent
Language	English

Related product manuals

Kubota RTV-XG850

5 pages