Kubota B2320 Series Workshop Manual

TO THE READER
This Workshop Manual has been prepared to provide servicing personnel with
information on the mechanism, service and maintenance of B2320, B2620 and B2920.
It is divided into three parts, “General”, “Mechanism” and “Servicing”.
Q General
Information on the tractor identification, the general precautions, maintenance check
list, check and maintenance and special tools are described.
Q Mechanism
Information on the construction and function are included. This part should be
understood before proceeding with troubleshooting, disassembling and servicing.
Refer to Diesel Engine / Tractor Mechanism Workshop Manual (Code No. 9Y021-
01874 / 9Y021-18201) for the one which has not been described to this workshop
manual.
Q Servicing
Information on the troubleshooting, servicing specification lists, tightening torque,
checking and adjusting, disassembling and assembling, and servicing which cover
procedures, precautions, factory specifications and allowable limits.
All information illustrations and specifications contained in this manual are based on
the latest product information available at the time of publication.
The right is reserved to make changes in all information at any time without notice.
Due to covering many models of this manual, information or picture being used have
not been specified as one model.
November 2007
© KUBOTA Corporation 2007
KiSC issued 05, 2011 A
Find manuals at https://best-manuals.com

Kubota B2320 Series Specifications

General

Engine Type	Diesel
Engine Power	23 hp
Type	Compact Utility Tractor
Fuel Type	Diesel
Engine Cylinders	3
Hydraulic System	Open Center
3-Point Hitch	Category I
Transmission Type	Hydrostatic (HST)
Weight	1, 433 lbs
Drive	4WD
Engine Displacement	68.5 cu in