Kubota BX Series Installation Manual

DO NOT PROCEED FURTHER UNTIL YOU HAVE READ THE INFORMATION BELOW
1) Always wear personal protective equipment
2) A minimum of two people is necessary to safely install the cab
3) This ROPS cab is heavy. A lift assist device such as an overhead
hoist or high lift forklift is required.
4) Ensure your work area is well ventilated. The installation
requires the starting of the tractor which will produce
dangerous carbon monoxide fumes.
5) Read through the entire installation manual first.
6) Follow the installation instructions in order.
7) Reading the operators manual prior to using the ROPS cab.

Kubota BX Series Specifications

General

Engine Type	Diesel
Drive	4WD
Hydraulic System	Open Center
Three-Point Hitch	Category I
Transmission	Hydrostatic
Fuel Tank Capacity	6.6 gallons
Lift Capacity	680 - 775 lbs