Kubota D1803-CR-E4 - Function of Water Separator; Specification of Water Separator (Type2); Electromagnetic Fuel Feed Pump; Function of Electromagnetic Fuel Feed Pump

(1) Hand pump
(2) Separator body
(3)
Level sensor
(A) Fuel inlet
(B) Fuel outlet
3.6.4 Function of water separator
The water separator removes water and solid particles
included in the fuel.
The
amount
of water in the water separator can not be
determined by looking at the outside so an alarm is
sent to the operator using a level sensor.
3.6.5 Specification of water separator
(Type2)
Hand pump discharge volume
15 cm
3
/ stroke
0.92 cu.in. / stroke
3.7 Electromagnetic fuel feed pump
3.7.1 Outline of electromagnetic fuel feed
pump
The electromagnetic fuel feed pump supplies fuel to the
engine.
3.7.2 Structure of electromagnetic fuel feed
pump
The electromagnetic fuel feed pump is made up of a
pump filter and connector and the like.
(1) Fuel inlet (2) Fuel outlet
3.7.3 Function of electromagnetic fuel feed
pump
The electromagnetic fuel feed pump feeds fuel to
supply the fuel to the supply pump.
Voltage
is supplied to the electromagnetic fuel feed
pump when the key is turned ON.
3.7.4 Specification of electromagnetic fuel
feed pump
Rated voltage 12 V
4. ENGINE
MECHANISM
3. Fuel system
4-18
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
KiSC issued 12, 2018 A