3. Working cautions
• Wear a uniform suited for service working. Do not
wear
loose clothes as they could get caught on the
control lever.
• Wear the proper protective equipment when
checking the machine. For example helmet, eye
protector and protective shoes.
• Do not check the machine after you have
consumed alcohol or drugs or when you are tired.
• Park the machine on a stable and level ground.
Keep
the machine away from obstacles and
hazardous materials.
• Make sure to ventilate the work area in cases of
working indoors.
• Do not allow third parties to come near the
machine.
• Keep the machine clean. Remove dirt, debris, and
oil attached to the machine.
• Make sure you have the support of the 3 points with
both
hands holding the handle and one foot at the
step when getting on and off the machine.
• Confirm the
coolant temperature and release
pressure when opening the radiator cap.
• Release residual pressure in the hydraulic circuit
before removing the hydraulic components.
• Pay attention when releasing pressure in hydraulic
circuit, the machine or attachment might move
unexpectedly.
• When working under the machine, make sure the
machine does not move back and forth.
• When working under the machine, provide secure
support for the machine.
• When using a garage jack, always use with a rigid
rack to prevent the machine from falling.
1. SAFETY
SAFETY FIRST
3. Working cautions
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
To Next Page
Loading...
