44 SPECIFICATIONS
ENGLISH
A Specifications are subject to change without notice.
Model D1105-TE3 D1305-E3
Type Vertical, water-cooled, 4-cycle diesel engine
Number of cylinders 3
Bore and stroke mm (in.) 78 × 78.4 (3.07 × 3.09) 78 × 88 (3.07 × 3.46)
Total displacement L (cu.in.) 1.123 (68.53) 1.261 (76.95)
Combustion chamber Spherical Type (E-TVCS)
SAE NET Intermittent kW / rpm
H.P. (SAEJ1349) (HP / rpm)
23.5/3000
(31.5/3000)
21.0/3000
(28.2/3000)
SAE NET Continuous kW / rpm
H.P. (SAEJ1349) (HP / rpm)
20.4/3000
(27.3/3000)
18.2/3000
(24.4/3000)
Maximum bare speed rpm 3200
Minimum bare idling speed rpm 850 ~ 950 850 ~ 950
Order of firing 1-2-3
Direction of rotation Counter-clockwise (viewed from flywheel side)
Injection pump Bosch MD Type Mini Pump
Injection pressure 13.73 Mpa (140 kgf/cm
2
, 1991 psi)
Injection timing (Before T.D.C.) 18° 19°
Compression ratio 24 : 1
Fuel Diesel Fuel No.2-D (ASTM D975)
Lubricant
(API classification)
above CF grade
Dimension mm (in.)
(length × width × height)
497.8 × 433.0 × 626.0
(19.60 × 17.05 × 24.65)
497.6 × 396.0 × 590.1
(19.59 × 15.59 × 23.2)
Dry weight
(BB Spec.) kg (lbs.)
97
(213.8)
95
(209.4)
Starting system Cell starter (with glow plug)
Starting motor 12 V, 1.0 kW 12 V, 1.2kW
Charging generator 12 V, 360 W 12 V, 480 W
Recommended battery capacity 12 V, 65 AH, equivalent 12 V, 70 AH, equivalent
To Next Page
Loading...
