Need help?Do you have a question about the Kubota L5460 and is the answer not in the manual?
General| Engine Type | Diesel |
|---|---|
| Transmission Type | Hydrostatic |
| Drive | 4WD |
| Displacement | 148.5 cu in |
| Number of Gears | 3 ranges |
| Hydraulic System | Open center |
| Tire Options | Ag, Turf, Industrial |
| Wheelbase | 74.6 inches |
| 3-Point Hitch | Category I |
General precautions and checks before starting tractor operation.
Recommendations and safety regarding Cabin and Roll Over Protective Structures.
Safe operation practices for general tractor use.
Safety measures to protect children around the tractor and work area.
Precautions for safe operation on sloped terrain to prevent upsets.
Guidelines for safe tractor operation when driving on public roads.
Procedures for safely parking the tractor, including brake engagement.
Safety precautions for operating the Power Take-Off (PTO) system.
Safety guidelines for using the tractor's 3-point hitch system.
General safety precautions to be followed when servicing the tractor.
Information on identifying and understanding hazard labels on the tractor.
Information and actions for messages and indicators during tractor operation.
Procedures for parking, differential lock, and operating on slopes/roads.
Information on the DPF muffler and exhaust aftertreatment.
Explanation of DPF regeneration modes and procedures.
Step-by-step guide for regeneration inhibit procedures.
Understanding PM warning levels in inhibit mode and required actions.
Step-by-step procedure for starting the tractor engine.
Procedures for safely stopping the tractor's engine.
Importance and procedure for warming up the engine and transmission oil.
Safe procedures for jump-starting the tractor's battery.
Safe practices for getting on and off the tractor.
Steps and precautions for starting the tractor.
Procedures for parking, differential lock, and operating on slopes/roads.
General safety and operational guidelines for the PTO.
Overview of the 3-point hitch control system functions.
Schedule of maintenance tasks based on operating hours.
Specifications for lubricants, fuel, and coolant for the tractor.
Daily inspection items to ensure safe operation and performance.
Maintenance tasks to be performed every 50 operating hours.
Maintenance tasks to be performed every 100 operating hours.
Maintenance tasks to be performed every 200 operating hours.
Maintenance tasks to be performed every 400 operating hours.
Procedure for changing the engine oil.
Procedures for changing transmission fluid and hydraulic filter.
Maintenance tasks to be performed every 600 operating hours.
Maintenance tasks to be performed every 800 operating hours.
Maintenance tasks performed every 1000 hours or 1 year.
Maintenance tasks to be performed every 1500 operating hours.
Maintenance tasks performed every 2000 hours or 2 years.
Maintenance tasks to be performed every 3000 operating hours.
Maintenance tasks to be performed annually.
Maintenance tasks to be performed every 2 years.
Maintenance tasks to be performed every 4 years.
Maintenance tasks performed as needed.
Common engine problems and their solutions.
Troubleshooting issues specific to the HST system.
Troubleshooting issues specific to the GST system.
Troubleshooting issues specific to the Manual Transmission.
To Next Page
