10 OPERATING THE ENGINE
OPERATING THE ENGINE
To avoid personal injury:
A Read "SAFE OPERATION" in the front of this
manual.
A Read the danger, warning and caution labels
located on the machine.
A To avoid danger of exhaust fume poisoning, do
not operate the engine in a closed building
without proper ventilation.
A Never start the engine while standing on the
ground. Start the engine only from the
operator's seat.
STARTING THE ENGINE
BParking Brake Lock Pedal
A To apply the parking brake, depress the brake pedal
and the parking brake lock pedal simultaneously with
your right foot. Then release the brake pedal while
holding the parking brake lock pedal down.
A To release the parking brake, depress the brake pedal
and release slowly with your right foot.
A This machine is equipped with safety devices.
If you dismount from the seat and the parking brake is
not applied, the engine will stop automatically.
(Operator presence control)
[T1880]
The operator's seat position can be adjusted forward and
rearward. Loosen the seat adjustment knob, slide the seat
to the desired position and then retighten the knob.
1. Apply the parking brake.
(1) Brake pedal
(2) Parking brake lock pedal
(A) "DEPRESS"
(B) "PUSH FORWARD WHILE
DEPRESSING (1)"
2. Make sure that the PTO lever is in the
"DISENGAGED" position.
(1) PTO lever : "ENGAGED"
: "DISENGAGED"
3. Adjusting the operator's position.
(1) Seat adjustment knob
To Next Page
Loading...
