GENERAL
WG1605-G-E3,WG1605-L-E3,WG1605-GL-E3, WSM
G-7
3. MAINTENANCE CHECK LIST
To keep long-lasting and safe engine performance, make it a rule to do regular inspections by following the table
below. (The schedule applies to an engine in use under normal conditions.)
[WG1605-E3]
Change engine oil and replace oil filter cartridge after the first 50 hours of operation.
*: Change more often when operating under dusty conditions.
**: If you do not have the proper tools and / or are not mechanically proficient, contact your local KUBOTA dealer.
• When changing or inspecting, be sure to level and stop the engine.
9Y1210661GEG0008US0
Item
Service Interval
Every
8hrs
(Daily)
Every
50 hrs
(Weekly)
Every
100 hrs
Every
200 hrs
Every
1000 hrs
Every
2000 hrs
Every
1 year
Every
2 years
Checking engine oil level
Checking and fill coolant
Checking air cleaner element
if
necessary
Cleaning air cleaner element
if
necessary
Checking LPG / natural gas tank setting
condition
if
necessary
Checking LPG / natural gas fuel connector
Changing engine oil
Replacing oil filter cartridge
Checking gasoline fuel hose and clamp
bands
Checking LPG / natural gas fuel hose and
clamp bands
Cleaning spark plug
Checking fuel filter
Check fan belt tension and damage
Checking battery electrolyte level
Replacing fuel filter
if
necessary
Checking LPG / natural gas tank setting
condition
Checking radiator hoses and clamp bands
Checking PCV valve
Checking coolant hose of LPG / natural gas
vaporizer
Checking LPG / natural gas Lock off valve
Checking valve clearance
Replacing spark plug
* Replacing air cleaner element
Replacing gasoline fuel hose, clamp bands
and fuel filter
Cleaning fuel tank inside (for gasoline fuel)
Cleaning water jacket and radiator interior
Replacing intake air line
Replacing breather hose
Replacing LPG / natural gas fuel hose and
clamp bands
Replacing coolant hose of LPG / natural
gas vaporizer
** Checking LPG / natural gas vaporizer
Replacing radiator hoses and clamp bands
Changing radiator coolant
Replacing battery