Kubota WG1605-G-E3 - Tightening Torques for General Use Screws, Bolts

ENGINE
WG1605-G-E3,WG1605-L-E3,WG1605-GL-E3, WSM
1-S11
[2] TIGHTENING TORQUES FOR GENERAL USE SCREWS, BOLTS
If the tightening torque is not specified, refer to the table below for the none specified torques values.
9Y1210661ENS0090US0
Indication on
top of bolt
No-grade or 4T 7T
Unit N·m kgf·m lbf·ft N·m kgf·m lbf·ft
M6 7.9 to 9.3 0.80 to 0.95 5.8 to 6.8 9.81 to 11.2 1.00 to 1.15 7.24 to 8.31
M8 18 to 20 1.8 to 2.1 13 to 15 24 to 27 2.4 to 2.8 18 to 20
M10 40 to 45 4.0 to 4.6 29 to 33 49 to 55 5.0 to 5.7 37 to 41
M12 63 to 72 6.4 to 7.4 47 to 53 78 to 90 7.9 to 9.2 58 to 66
KiSC issued 05, 2014 A