Kubota WG1605-G-E3 - Names of Parts

3NAMES OF PARTS
ENGLISH
NAMES OF PARTS
[WG1605-G-E3 / WG1605-L-E3 / WG1605-GL-E3 / WG1605-N-E3 / WG1605-LN-E3]
G Type : WG1605-G-E3, L Type : WG1605-L-E3, GL Type : WG1605-GL-E3, N Type : WG1605-N-E3,
LN Type : WG1605-LN-E3
A (25) ECU (Engine Control Unit) is not connected to the engine in the figure above.
Ref.
No.
Part Name
Type
Ref.
No.
Part Name
Type
GLGLNLN GLGLNLN
(1) Oil filler plug (14) Electronic control throttle
(2) Delivery pipe (gasoline) - - - (15) Injector - - -
(3) Plug ignition coil (16) Gas mixer -
(4) Spark plug (17) Pressure regulator -
(5) PCV valve (18) Intake manifold
(6) Engine hook (19) Cooling fan
(7) Oil level gauge (20) Fan belt
(8) Exhaust manifold (21) Fan drive pulley
(9) Starter (22) Oil drain plug
(10) Alternator (23) Oil pan
(11)
Coolant drain shutoff-valve
(24) Flywheel
(12) Oil filter cartridge (25)
ECU (Engine Control Unit)
(13) Oil pressure switch
EG523‑8917E.bookPage3Friday,October11,20199:54AM