Kubota WG1605-G-E3 - Stopping the Engine

11OPERATING THE ENGINE
ENGLISH
STOPPING THE ENGINE
Gasoline
1. Cool down the engine for 2 to 3 minutes.
2. Turn the starter switch to the "OFF" ( )
position.
3. Remove the key at the "OFF" position.
Natural Gas
1. Cool down the engine for 2 to 3 minutes.
2. Turn the starter switch to the "OFF" ( )
position.
3. Close the withdrawal valve of the NG
supply.
4. Remove the key at the "OFF" position.
LPG
1. Cool down the engine for 2 to 3 minutes.
2. Turn the starter switch to the "OFF" ( )
position.
3. Close the liquid withdrawal valve of the
LPG fuel tank.
4. Remove the key at the "OFF" position.
(A) “OFF“
(B) “ON”
(C) “START”
EG523‑8917E.bookPage11Friday,October11,20199:54AM