11MAINTENANCE
ENGLISH
SERVICE INTERVALS
Non-warranty maintenance, repair, or replacement of the emission control devices and systems should be performed by
a qualified repair establishment or individual which has the experience and equipment to perform such work.
See the Emission Warranty Statement.
In order to keep your engine in good working conditions, be sure to follow the maintenance / checking schedule given in
the table below. (The schedule applies to an engine in use under normal conditions.)
: If necessary
IMPORTANT:
*1 Change more often when operating under dusty conditions.
*2 If you do not have the proper tools and/or are not mechanically proficient, contact your local KUBOTA dealer.
To ensure the best quality and reliability, use new KUBOTA Genuine parts or their equivalents for repair and replacement,
whenever you have maintenance done.
Items
Interval
Remarks
Ref.
Page
Every
8 hours
(daily)
Every
50 hours
(weekly)
Every
100
hours
Every
200
hours
Each part Check / Clean -
Engine oil
Check /
Replenish
16
Change
(Initial
change)
17
Oil filter cartridge Change
(Initial
change)
17
Spark plug
Clean 18
Adjust 18
Change -
Air cleaner element
Check 21
Clean 21
Change 21
Intake pipe /
clamp bands
Change -
Fuel filter
Check -
Change -
Fuel tank
Clean Gasoline line -
Check setting LPG line 15
Fuel pipe / clamps
(Gasoline line)
Check 15
Change 15
Fuel pipe / clamps
(LPG line: LPG tank
to regulator assy
(D-EPR))
Check the
connector
-
Check fuel
leakage
15
Change -
EG523-8916-2_E.book 11 ページ ２０１１年１２月１９日 月曜日 午後４時５９分
To Next Page
Loading...
