Kubota WG2503-L-E3 - NAMES OF PARTS

6 NAMES OF PARTS
ENGLISH
[WG3800-G-E3 / WG3800-L-E3 / WG3800-GL-E3 / WG3800-N-E3 / WG3800-LN-E3]
G Type : WG3800-G-E3, L Type : WG3800-L-E3, GL Type : WG3800-GL-E3, N Type : WG3800-N-E3,
LN Type : WG3800-LN-E3
A Gas mixer has two models.
N and LN type's gas mixer are different from L and GL type.
A The part marked *1 is optional. It is required for continuous operation over 15 hours (day and night) ex. Generator,
Pump.
Ref.
No.
Part Name
Type
Ref.
No.
Part Name
Type
GLGLNLN GLGLNLN
(1) Engine hook (13) Alternator
(2) Oil filler plug (14) Intake manifold
(3) PCV valve (15) Electronic control throttle
(4) Plug ignition coil (16) Gas mixer -
(5) Spark plug (17) Pressure regulator -
(6) Exhaust manifold (18) Cooling fan
(7) Flywheel (19) Fan belt
(8) Oil drain plug (20) Fan drive pulley
(9) Oil pan (21) Oil filter cartridge
(10) Starter (22) Oil level gauge
(11) Oil pressure switch (23)
ECU (Engine Control
Unit)
(12) Delivery pipe (gasoline) - - - (24) Injector - - -
(25) Oil separator - *1 - *1 *1
EG523‑8917E.bookPage6Friday,October11,20199:54AM