Kubota WG3800-GL-E3 - Cooling System and Air Cleaner Maintenance

18 MAINTENANCE
ENGLISH
: If necessary
IMPORTANT:
*1 Change more often when operating under dusty conditions.
*2 If you do not have the proper tools and/or are not mechanically proficient, contact your local KUBOTA dealer.
No adjustment is needed on the models equipped with HLA (Hydraulic Lash Adjuster).
*3 This is not necessary to keep the emission related warranty valid.
To ensure the best quality and reliability, use new KUBOTA Genuine parts or their equivalents for repair and replacement,
whenever you have maintenance done.
Items
Interval
Remarks
Ref.
Page
Every
400
hours
Every
500
hours
Every
1000
hours
Every
1500
hours
Fuel pipe / clamps
(LPG line: LPG tank
to regulator assy
(D-EPR))
Check the
connector
-
Check fuel
leakage
20
Change -
Fuel pipe / clamps
(NG line: NG tank
to regulator assy
(D-EPR))
Check the
connector
-
Check fuel
leakage
21
Change -
Breather tube Change -
PCV valve Check -
Hot water line of LPG
vaporizer regulator
Check 20
Change -
Hot water line of NG
regulator
Check -
Change -
LPG vaporizer
regulator
Check inner
parts*2
-
NG
regulator
Check inner
parts*2
21
LPG Lock off valve Check -
Radiator coolant
Check 26
Change 28
Radiator hoses
and clamp bands
Check 28
Change 28
Radiator and water jacket Clean 28
Fan belt
Check 34
Adjust 34
Change 34
Fan belt with auto
tensioner
Check -
Change -
Valve clearance Adjust *2 -
Oil separator element Change 35
Rubber piping
related oil separator
Change 35
EG523‑8917E.bookPage18Friday,October11,20199:54AM