Kuehn WD10 User Manual

Manual WD10
1
kuehn
NMRA-DCC/Motorola
Universal
Switch decoder WD10
The switch decoder WD10 is used to switch points (twin solenoid), signals,
uncouplers, light signals (two or more lights), lighting and other consumers. The
WD10 is a multi-protocol decoder and can be used with controllers that support
the Märklin-Motorola-format (e.g. 6021), and DCC controllers (e.g. Lenz, Multi-
maus)
Technical data and features:
•
in DCC-format 2044 addresses
•
in Motorola-format 320 addresses
•
in total 16 transistor outputs (e.g. for 8 points or block signals)
•
RailCom® (bidirectional communication, only in use with DCC
•
Power from the digital controller or external AC or DC power unit
•
simple choice of address and operation mode by internal programming button
•
programmable on the program track of the DCC controller
•
programmable in built-in state through programming on the main
•
selectable light (shadowing) effects for light signals
•
minimal power
12 V
•
maximum power (AC)
16 V
•
maximum power (pure DC)
24 V
•
maximum current per switch output
1,0 A
•
maximum current per output group (group A or B)
1,0 A
•
maximum total current
1,8 A
•
working temperature
0 to 60°C
•
measurements (in mm, without assembly points)
ca. 83 x 60 x 25
Important note: The decoder is only provided for use in model railway layouts in
dry rooms. The use of the decoder is only permitted under supervision. The extra
power supply has to be a model railway transformer, that will switch of by a short
circuit to prevent fire. The connection of the decoder is only allowed in powerless
mode.

Kuehn WD10 Specifications

General

Brand	Kuehn
Model	WD10
Category	Media Converter
Language	English