Kuka KR 30-2 - Page 37

37 / 85Issued: 08.09.2015 Version: Spez KR 30, 60-2 JET V1
4 Technical data
Supplementary
load
The robot can carry supplementary loads on the arm. When mounting the sup-
plementary loads, be careful to observe the maximum permissible total load.
The dimensions and positions of the installation options can be seen in the di-
agram.
Fig. 4-24: Mounting flange
1 M8 fastening screws, grade 10.9
Depth of engagement:
min. 12 mm
max. 14 mm
2
Ø63
H7
usable fit depth 6 mm