68 / 85 Issued: 08.09.2015 Version: Spez KR 30, 60-2 JET V1
KR 30-2 JET; KR 60-2 JET
The fork slots must be installed for transport.
Transportation The robot can be transported by fork lift truck or using lifting tackle. The fork
slots must be properly and fully installed.
Transportation by
fork lift truck
For transport by fork lift truck (>>> Fig. 7-3 ), the fork slots must be installed.
Fig. 7-2: Transport dimensions
1 Robot
2 Fork slots
3 Center of gravity
Use of unsuitable handling equipment may result in dam-
age to the robot or injury to persons. Only use authorized
handling equipment with a sufficient load-bearing capacity. Only transport
the robot in the manner specified here.
Avoid excessive loading of the fork slots through undue
inward or outward movement of hydraulically adjustable
forks of the fork lift truck. Failure to do so may result in material damage.
Fig. 7-3: Transport with a fork lift truck
To Next Page
Loading...
