Need help?Do you have a question about the Kunzle & Tasin Bona Scorpion DCS and is the answer not in the manual?
General| Brand | Kunzle & Tasin |
|---|---|
| Model | Bona Scorpion DCS |
| Category | Sander |
| Language | English |
Explains the meaning of various safety symbols used in the manual and on the machine.
General safety precautions and warnings for operating the Bona Scorpion DCS.
Continues operator safety instructions, including hazard information.
Further safety guidelines related to hazards and machine operation.
Proper procedures and conditions for storing the machine when not in use.
Detailed steps for dismantling and transporting the machine by a single operator.
Continuation of the process for transporting the machine by one person.
Final steps for handling and transporting the machine individually.
Instructions for safely transporting the machine with assistance from another person.
Steps for transporting the fully assembled machine with two operators.
Essential guidance for the safe and proper operation of the machine.
Continues safe usage practices and highlights prohibited uses.
Details about the information provided on the machine's data plate.
Step-by-step guide to reassemble the machine after it has been transported.
Continues the instructions for reassembling the machine.
Procedures and safety measures for connecting the machine to the electrical supply.
Recommendations and warnings for using appropriate electrical cables and plugs.
Method for managing and removing sawdust produced during operation.
Crucial personal safety measures, including protective gear.
Emphasizes adherence to all safety instructions and warnings.
Reinforces the importance of following safety directives and warnings.
Key operational guidelines and highlights of hazardous situations.
Comprehensive technical data and specifications for the Bona Scorpion DCS.
Outlines specific uses that are strictly forbidden for the machine.
Step-by-step instructions to initiate the sander's operation.
Continues the detailed process for starting the sander.
Final steps to safely start the sander and commence work.
Instructions for activating and using the vacuum cleaner function.
Guide on how to adjust the drum pressure for optimal sanding.
Procedure for adjusting the position of the machine's wheels.
Instructions for correctly fitting the abrasive disc onto the drum.
Routine checks and cleaning of the sawdust chamber.
Inspection and cleaning of the machine's drums.
Cleaning the wheels to prevent uneven sanding results.
Maintenance of the suction unit and its fabric filter.
Guidelines for replacing the dust bag when it is full.
Procedure for checking and adjusting the belt tension.
Checks for bearing wear, intended for technical support personnel.
Information on the importance of using genuine Bona/Künzle & Tasin spare parts.
Troubleshooting guide for common problems and their solutions.
Further troubleshooting for issues related to drum contact and surface scorching.
Official statement confirming compliance with EU directives and standards.
Instructions for the responsible disposal of the equipment in the European Union.
To Next Page
