Introducing Artis SE
The Rear Panel
9
e Kurzweil CC-1 continuous control pedal will work best with the Artis SE, but it is also
possible to use third-party continuous control pedals designed for synthesizers.
NOTE : Only CC pedals should be connected to the CC pedal
input.
The Headphones Jack
Use the HEADPHONES jack to listen to the Artis SE on stereo headphones. e headphone
jack is located at the rear of the instrument, near the power switch. You will need a 1/4-inch-
to-1/8-inch adapter in order to use headphones that have a smaller mini plug connector.
To Next Page
Loading...
