Kurzweil Artis SE - Global Mode

Introducing Artis SE
Front Panel Overview
14
For example, when the Strings category and Bank A are selected, the Program Select buttons
can be used to select one of the 8 Strings programs in Bank A. If Bank B is selected, the
Program Select buttons will select from a second set of 8 Strings Programs in Bank B.
The Mode Buttons (2)
Use these to select the corresponding operating mode. They are mutually-exclusive, and the
Artis SE will default to Multi Mode upon startup.
MULTI Mode
A Multi allows up to 4 instrument sounds (Programs) to be played from the keyboard at
once. A Multi has four Zones, each with its own keyboard range, Program, MIDI channel,
and controller assignments. To select a specic Multi, use the Category and Multi Select
buttons, the -/+ buttons, or the Alpha Wheel.
PROGRAM Mode
In Program Mode, individual instrument sounds (Programs) can be selected and played. The
sound of each Program can be modied by parameters that are assigned to the controllers
(Sliders, Switch buttons, Mod Wheel, and Pedals). Modied Programs can be saved as User
Programs by pressing the SAVE button.
GLOBAL Mode
Global Mode allows you to edit global parameters and MIDI settings, or restore factory
defaults with a hard reset. To enter Global Mode from another Mode, press the Global
Mode button.
CAUTION: Global Mode contains certain operations that cannot be
undone. Read about Global Mode in the Artis SE Musician’s Guide.
STORAGE Mode
This Mode allows you to save or load les from a computer or other USB-equipped storage
device. On the main Storage menu, four options are available: Device (PC or USB), Store,
Load (Overwrite) or Load (Fill). Pressing the EXIT Button while in Storage Mode will
return to the previous Mode the instrument was in.
Valid le formats for loading are: .ART, .PC3, .P3K, .PLE, .SPX. and .ASE (Artis SE
extension). When a le has been selected to load, pressing the + Button or Assign Button
will load the selected le. Pressing the EXIT Button or - Button will return to the main
Storage page.