Troubleshooting
Maintenance
12-1
Chapter 11
Troubleshooting
Maintenance
Aside from normal care in handling and use, your Artis SE requires no regular maintenance.
Clean with a soft cloth dampened with water. Never use abrasives or solvents as they
may damage the unit’s paint, markings and display lens. ere are no batteries inside to
replace—ever. Instead of volatile SRAM used in most other instruments, your Artis SE uses
nonvolatile Flash Memory for storage, which retains information without power.
Common Problems
Below is a list of the most commonly encountered problems and diagnoses for each.
Power Problems
is is the normal power-up sequence:
1. e display backlight turns on.
2. “Loading...” appears on the display for a few seconds.
3. e Artis SE enters Program Mode with Program 1 or the Category Default Program for
the Piano1 category selected.
If nothing at all happens when you turn the power switch on, check if one of the following
might be the issue:
e power cable is not plugged
securely into the wall outlet.
Plug the power cable securely into the wall
outlet.
e power cable is not plugged
securely into the Artis SE power jack.
Plug the power cable securely into the Artis
SE power jack.
To Next Page
Loading...
