Kurzweil Artis SE - Physical Specifications

Physical Specications
B-1
Appendix B
Physical Specications
1
Keyboard:
88-key, fully-weighted hammer-action with velocity sensitive keys. (Fatar
TP/100).
Display: 20 x 2 character LCD with front-panel contrast adjust.
Polyphony:
128 Voice Polyphony, dynamically allocated.
Multitimbral:
16 parts (one per MIDI channel).
Quick Split / Layer:
Easy access with adjustable relative volume (up to 4 zones).
Programs: 256 Factory plus 256 User Programs.
Multis:
128 Factory Multis, plus 256 User Multi locations with 4 programmable zones
for splits and layers.
Effects:
Over 1000 complex effect chains, incorporated into programs. 16 total FX
units. Not editable, excepting Aux Override.
Master EQ Section: Dedicated front-panel 3-band EQ with on/off switch
Controllers: • Front panel mounted Pitch and Modulation wheels
• Volume Slider
• 4 sliders
• 2 programmable switch buttons
• 2 Dedicated transpose switches
• 2 switch pedal inputs** (1 switch/sustain pedal is included)
• 1 continuous control pedal input
(** Each switch pedal input supports a single or dual switch pedal, or a single
half-damper* pedal. Half-damper for MIDI output only.)
Analog Outputs: • Two 1/4” balanced TRS analog (24-bit DACs)
• +21dBu maximum output
• 400Ω balanced source impedance
Audio Inputs: One stereo 1/8" back-panel input
Headphones: 1 rear panel 1/4” headphone output;
130mW into 32 ohm headphones
MIDI: IN, OUT
USB:
• Complete MIDI functionality over USB
• User program/multi le transfer to/from PC/Mac/Flash Drive
• Operating System updates from PC/Mac/Flash Drive
FREE OS Updates
Operating System updates from PC / Mac / USB Flash Drive
Height: 5.87” (14.9 cm)
Depth: 14.8” (37.6 cm)
Length: 50.63” (128.6 cm)
Weight: 38.6 lbs (17.5 kg)
Power:
External DC 15V 2.5A power Supply
1 Specications subject to change without notice