Getting Started
Connecting MIDI
2-10
Connecting a Continuous Control Pedal
A continuous control pedal can be very useful for controlling volume, wah, or other eects
by foot.
e Kurzweil CC-1 continuous control pedal will work best with the Artis SE, but it is also
possible to use third-party continuous control pedals designed for synthesizers.
NOTE : Using a third-party continuous control pedal / volume pedal
may or may not be satisfactory depending on how it is constructed.
See Continuous Control and Half-Damper Pedal Problems on page 12-5 if you are having
trouble with your continuous control pedal.
To Next Page
Loading...
