Kurzweil Artis SE - Program Mode; Global Mode; Storage Mode; Multi Edit Mode

The Operating Modes
Program Mode
5-2
Program Mode
In Program Mode, instrument sounds (Programs) can be selected and played. e sound of
each Program can be modied by parameters that are assigned to the controllers (Sliders,
Switch buttons, Mod Wheel, and Pedals). Modied Programs can be saved as User Programs
by pressing the Save button.
To enter Program Mode from another Mode, press the Program Mode button.
For more detailed information on Program Mode, see Program Mode on page 5-2.
Global Mode
CAUTION: THIS MODE CONTAINS CERTAIN OPERATIONS THAT
CANNOT BE UNDONE. Read Global Mode on page 9-1
Global Mode allows you to edit global parameters and MIDI settings, load and save User
Programs and Multis, or restore factory defaults with a hard or soft reset. To enter Global
Mode from another Mode, press the Global Mode button. See Global Mode on page 9-1
for further information.
Storage Mode
is Mode allows you to save or load les from a computer or other USB-equipped storage
device. Begin by pressing the Storage Mode button. On the main Storage menu, four
options are available: Device (PC or USB), Store, Load (Overwrite) or Load (Fill). Pressing
the Exit Button while in Storage Mode will return to the previous Mode the instrument was
in.
Valid le formats for loading are: .ART, .PC3, .P3K, .PLE, .SPX. and .ASE (Artis SE
extension). When a le has been selected to load, pressing the + Button or Assign Button will
load the selected le. Pressing the Exit Button or - Button will return to the main Storage
page. See Storage Mode on page 10-1 for further detail.
Multi Edit Mode
Multi Edit Mode allows you to edit pre-existing Multis.
To enter Multi Edit Mode press the Edit Button while in Multi Mode. e Edit button does
apply in Program Mode; however, hitting Split or Layer while in Program mode will also put
the Artis SE into Multi Edit mode. See Multi Edit Mode on page 8-1 for more detail.