Kurzweil Forte SE - Physical Specifications

Physical Specications
B-1
Appendix B
Physical Specications
1
Keyboard:
88-key, fully-weighted hammer-action with velocity and pressure (After Touch) sensitive
adjustable keys. 88-key model uses Fatar TP100LR with pressure.
Display: 240x64 pixel monochrome LCD with front-panel contrast adjust.
Polyphony: 128 Voice Polyphony, dynamically allocated.
Multitimbral: 16 parts (one per MIDI channel).
Quick Split / Layer: Easy access with adjustable volume and panning.
Programs: Space for 1024 Factory and 1024 User Programs (in 16 instrument Categories)
Multis:
Space for 1024 Factory Multis, plus 1024 User Multi locations with up to 8 programmable zones for
splits and layers.
Effects: Hundreds of editable effects chains.
Controllers:
• Pitch wheel
• Modulation wheel
• Volume Slider
• 9 front panel sliders
• 11 switches (assignable / zone mutes / KB3 control)
• 1 Variation switch
• 4 Master EQ Knobs with one EQ On/Off switch
• 2 switch pedal inputs, each supporting a dual switch pedal or single half damper pedal.
• 1 continuous control pedal input
• 2 Transpose buttons
Analog Outputs:
Two 1/4” TRS Balanced Outputs (Stereo Pair)
24-bit D-to-A Converters
Frequency Response 20Hz-20kHz +/- 0.1dB
+21dBu Maximum Output Level
-113dB Signal-to-Noise Ratio (A-weighted)
0.003% THD+N (1kHz @ -1 dBFS)
Headphones:
1/4” Rear-Mounted Stereo Headphone Output
Frequency Response 20Hz-20kHz +/- 0.5dB
Maximum Output Power 130mW into 32 Ohms
-100dB Signal-to-Noise Ratio (A-weighted)
0.03% THD+N (1kHz @ 100mW Output into 32 Ohm Load)
Output Impedance: < 1 Ohms
Load Impedance: > 24 Ohms
MIDI: IN, OUT
USB:
Complete MIDI functionality over USB
User Program / Multi le transfer to/from PC / Mac / Tablet/ USB Flash Drives.
Operating System updates from PC / Mac / USB Flash Drive
Height: (5.2”) (13.2cm)
Depth: (15.2”) (38.6cm)
Length: (48.9”) (124.2cm)
Weight: (40.8 lb.) (18.5 kg)
Power: Internal Power Supply, free voltage 100-265VAC 50/60Hz, 10W max
1 Specications subject to change without notice