****Version 6
is
required
to
use the
RAM
Cartridge
in
the
K250.
*****MacAttach
is
no
longer available when the K250
is
upgraded to Version
6.
Note: The Enhanced Resident Sound Block can only be
installed in units with Version
3.1
or better. Therefore
units that
currently have Version 2 or 2.2 must be updated
when ordering the Enhanced Resident Sound
Block.
Note: When installing the Enhanced -Resident Sound Block
in
units with sampling, be sure
to
remove the 20 DRAMs from
the
old CGP and reinstall them
in
the Enhanced Sound Block.
If
the unit has a Sound Block A board with the 10 Sound
Block A chips socketed, the chips may be removed and
installed
in
the Enhanced Resident Sound Block (see
Enhanced Resident Sound
Block Configuration list).
Kurzwell
250
Service Manual, Chapter 2
2 - 1 9
To Next Page
Loading...
