The
LCD
should now display the following:
1"#$%&
'()*+,-./01234567
89:;<=>?@ABCDEFGHIJKLMNO
Press SELECT
The
LCD
should now display the following:
PQRSTUVWXZ[]A
_8bcdefg
hijklmnopqrstuvwxyz{I}><
4.7 - LED TEST
The LED test
follows immediately after the LCD test by
pressing
SELECT.
These four tests will step through
in
sequence
automatically. To abort the
LED
tests, press and hold the
SELECT
switch.
The
Front Panel
LED
test consists of four parts:
1.
All LEDs on/off
10
times
2.
One
LED
on
at a time
3.
One
LED
off at a time
4. Enable/disable LEDs on/off
10
times
4.8 -
SWITCH TEST
After the LED test the
LCD
will indicate:
SWITCH TEST
PRESS ANY SWITCH
When any of the Front Panel switches is pressed, the switch
number and function name
will
be
displayed
on
the LCD. If the
switch
has
an
LED,
the
LED
will blink
on
and off.
Press the
SELECT
switch
to
exit this test.
Kurzwell 250 Service Manual, Chapter 4
4·6
To Next Page
Loading...
