Kurzweil K250 - Page 78

Press SELECT to proceed to the next ADC test.
VOLTAGE MAX? Press YES
The ADC reading should be E Q the same as the Master Tune
rightmost position.
Press
SELECT to proceed to next ADC test.
VOLTAGE MIN? Press YES
The ADC reading should be 14 the same as the Master Tune
leftmost position.
Press SELECT to proceed to the next ADC test.
EXTERNAL
PED 21 Press YES
The ADC readings should be approximately the same as for the
External
Pedal 1:
00 PEDAL NOT PLUGGED INTO REAR PANEL JACK
7E PEDAL UP
OB PEDAL DOWN
Press SELECT to proceed to the next ADC test.
ASSIGNABLE 3? Press YES
The ADC readings should be approximately the same as for the
Master Tune
slider:
14 SLIDER IN DOWN POSITION
80 SLIDER IN CENTER POSITION
ED SLIDER IN UP POSITION
Press SELECT to proceed to the next ADC test.
ASSIGNABLE 21 Press YES
,
Kurzwell 250 Service Manual, Chapter 4
4-8