Program Mode and the Program Editor
Function Soft Buttons
6-40
Import Layer (ImpLyr)
Copy a specific layer from another program into the current program. This button brings up a
dialog that prompts you to select a layer number and a program number. The dialog tells you
the currently selected layer, and the total number of layers in the program. Use one of the two
leftmost soft buttons (or the up/down cursor buttons) to change the layer number. If the
current program has only one layer, pressing these buttons will have no effect. Use one of the
two center soft buttons (or the left/right cursor buttons) to change the program number.
While you are on this screen, you can listen to the layer you are selecting to import, along with
all other layers in the current program. If you want to hear the layer to be imported by itself,
you must mute the other layers.
When you have selected the desired layer from the desired program, press the Import soft
button, and the selected layer will be copied from the selected program, becoming the current
layer. Importing layers is a convenient alternative to creating layers from scratch. If you have a
favorite string sound, for example, and you want to use it in other programs, just import its
layer(s) into the program you’re building. This will preserve the envelopes and all the control
settings so you don’t have to reprogram them.
Delete Layer (DelLyr)
Delete the current layer. When you press this button, the K2500 asks you if you want to delete
the layer; press the Yes soft button to start the deletion process, or the No soft button to cancel
it. This prompt prevents you from accidentally deleting a layer.
To Previous Page
Loading...
