10-128
KDFX Reference
KDFX Algorithm Specifications
Osc1 Freq The fundamental frequency of the conÞgurable oscillator. The oscillators can be set
through the audible frequencies 16-25088 Hz with 1 semitone resolution. This parameter
is active only in ÒOscÓ mode.
Osc1Shape Shape selects the waveform type for the conÞgurable oscillator. Choices are Sine, Saw+,
Saw-, Pulse, Tri, and Expon. This parameter is active only in ÒOscÓ mode.
Osc1PlsWid When the conÞgurable oscillator is set to Pulse, the PlsWid parameter sets the pulse width
as a percentage of the waveform period. The pulse is a square wave when the width is set
to 50%. This parameter is active only in ÒOscÓ mode and when the Pulse waveform is
selected.
Osc1Smooth Smooths the Saw+, Saw-, and Pulse waveforms. For the sawtooth waves, smoothing
makes the waveform more like a triangle wave. For the Pulse wave, smoothing makes the
waveform more like a sine wave.
Sinen Lvl The four sine wave oscillators (n = 2...5) may have their levels set between 0% (off) and
100% (maximum). This parameter is active only in ÒOscÓ mode.
Sinen Freq The four sine wave oscillators (n = 2...5) may have their frequencies set with this
parameter. The oscillators can be set through the audible frequencies 16-25088 Hz with 1
semitone resolution. This parameter is active only in ÒOscÓ mode.
To Next Page
Loading...