KDFX Reference
KDFX Algorithm Specifications
10-91
Signals that are symmetric in amplitude (they have the same shape if they are inverted, positive for
negative) will usually produce odd harmonic distortion. For example, a pure sine wave will produce
smaller copies of itself at 3, 5, 7, etc. times the original frequency of the sine wave. In the MonoDistort +
EQ, a dc offset may be added to the signal to break the amplitude symmetry and will cause the distortion
to produce even harmonics. This can add a ÒbrassyÓ character to the distorted sound. The dc offset added
prior to distortion gets removed at a later point in the algorithm.
Parameters for Mono Distortion
Parameters for MonoDistort + Cab
Parameters for MonoDistort + EQ
Page 1
Page 2
Parameters for StereoDistort + EQ
Page 1
Wet/Dry 0 to 100%wet Out Gain Off, -79.0 to 24.0 dB
Dist Drive 0 to 96 dB
Warmth 16 to 25088 Hz
Highpass 16 to 25088 Hz
Wet/Dry 0 to 100%wet Out Gain Off, -79.0 to 24.0 dB
Dist Drive 0 to 96 dB
Warmth 16 to 25088 Hz Cab Bypass In or Out
Cab Preset Plain
Wet/Dry 0 to 100%wet Out Gain Off, -79.0 to 24.0 dB
Dist Drive 0 to 96 dB
Warmth 16 to 25088 Hz dc Offset -100 to 100%
Cabinet HP 16 to 25088 Hz Cabinet LP 16 to 25088 Hz
Bass Gain -79.0 to 24.0 dB Treb Gain -79.0 to 24.0 dB
Bass Freq 16 to 25088 Hz Treb Freq 16 to 25088 Hz
Mid1 Gain -79.0 to 24.0 dB Mid2 Gain -79.0 to 24.0 dB
Mid1 Freq 16 to 25088 Hz Mid2 Freq 16 to 25088 Hz
Mid1 Width 0.010 to 5.000 oct Mid2 Width 0.010 to 5.000 oct
Wet/Dry 0 to 100%wet Out Gain Off, -79.0 to 24.0 dB
Dist Drive 0 to 96 dB
Warmth 16 to 25088 Hz
Cabinet HP 16 to 25088 Hz Cabinet LP 16 to 25088 Hz
To Next Page
Loading...