Kurzweil K2600 ROM - INSTALLATION REV E - Drive Selection; File Selection

10
Installing Kurzweil K2600 ROM Options
Installing Object Files
3. If you’re installing new operating system software (which is required for some options),
press OK to begin the procedure. If you’re not installing new operating system software,
skip to Step 11.
Bear in mind that you may have to install new operating software. For example, if your
operating system software is earlier than version 3.01, and you’re installing the Stereo
Dynamic Piano ROM option, you must install operating system version 3.01 or later (if
you don’t, the SD Piano option won’t work). Whichever option you’re installing, we
recommend that you install the most recent operating system software, but that’s up to
you, as long as you have the right base objects file. If you’re on line, be sure to check our
website for the most recent versions of both operating system software and object files.
The address is on page 3.
When you press OK, the Drive Selection page appears:
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|||||Device|to|install|from:||floppy||||
||||||||||||||||||||||||||||||||||||||||
|||||||SCSI|ID|of|this|unit:||N/A|||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|||||||||||||||||||||||||||Cancel||OK|||
4. By default, the K2600’s floppy drive is selected. If you’re going to install from floppy
disks, insert the disk containing Part A of the operating system (K26VnnnA.KOS) into the
floppy drive, then press OK. If you’re going to install from a hard disk, use the Alpha
Wheel to select the SCSI ID of the disk from which you’re going to install, then press OK.
In either case, the File Selection page appears:
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||File|to|install:|||K26VnnnA.KOS|1408K|
|||||||||||||||||||||RESOURCE.FRK|<DIR>|
|||||||||||||||||||||THEVOL|1|||||<DIR>|
||||||||||||||||||||||||||||||||||||||||
|||||||NewDrv||Root||Parent|Cancel||OK||
Note: In most cases, you can use the Plus/Minus buttons or the Up/Down cursor buttons
instead of the Alpha Wheel.
5. If necessary, use the Alpha Wheel to select the operating system file (K26VnnnA.KOS). If
you’re installing from a hard disk, you may need to use the Parent or Root soft button to
navigate to the directory where the file is stored. If you need to select a different drive,
press the NewDrv soft button, which returns you to the Drive Selection page.
When you’ve selected the operating system file, press OK. This displays a confirmation
page, which states that the K2600 is ready to install the selected file (including pathname)
from the selected drive.